Kingman Turquiose – ML Jewelry Designs

More New Pendants and Beaded Necklaces

I add a variety of new items to my online shop and in preparation for two back-to-back art shows in Leavenworth, WA.

I was busy in my shop for most of last week, continuing to make inventory for upcoming shows as summer winds to a close.

I started the week by making six beaded necklaces to match pendants I’d already made. You can find all of these in the Necklaces section of my online shop; I’ll be displaying them with the pendants I made them for at upcoming shows, even though they can be purchased separately.

Bumble Bee Jasper Necklace Howlite Necklace

Kingman Turquoise Necklace Onyx Necklace

Picture Jasper Necklace Ruby Zoisite Garnet Necklace
New necklaces in my shop. Left to right, top to bottom: Bumble Bee Jasper and sterling silver, Howlite and sterling silver, Kingman Turquoise with sterling silver and copper, black Onyx with sterling silver and copper, Picture Jasper with sterling silver, and Ruby in Zoisite and red Garnet with sterling silver.

Then I got down to it and made a few more pendants.

Kt Square w Cuts and Neck
Kingman Turquoise, orange spiny oyster shell, and bronze cabochon bezel set on sterling silver.

I had this nearly square Kingman Turquoise with Spiny Oyster Shell and bronze cabochon that was really calling out to me. I bezel-set it on a nearly square sterling silver backplate, which I accented with hand cut lines and stamped sterling silver balls. I used a tube bail; the photo here shows the pendant with the Kingman Turquoise beaded necklace shown above, which is sold separately.

Malachite Pendant
Malachite cabochon bezel set in sterling silver.

Because I was completely out of stock on pendants with another popular stone — malachite — I chose a small round cabochon and set that with a completely new style, using square wire wrapped around the bezel to form part of the bail. I’m not sure how much I like this design, but the stone is certainly pretty. I’ll be making a malachite necklace to go with this this weekend.

Sterling silver cross with Kingman Turquoise accent stone.

And finally, since I was so happy with the way the prototype copper cross I made last week came out, I made one in silver using the same techniques but upgrading the bail. I really like the rough, handmade look of these pieces.

All of these pendants are available in the Pendants area of my online shop and will be at my upcoming shows — until sold.

Keep checking in for more items as I make them. I can’t update this site daily, but I hope to be able to keep doing it at least once a week as I add inventory, show dates, and classes.

New Pendants and a Prototype of a Christian Cross Design Now in My Shop

I add four new pendants to the shop, including some fresh new designs.

I spent most of the week working on projects in my garage, but I did get to spend a few days in my jewelry studio making new pendants for upcoming shows and my online shop.

Ruby in Zoisite cabochons on hand stamped and pierced sterling silver. Buy it online.

The first is a variation on a design I’d done in the past for a triangular stone. In this case, I’ve got two Ruby in Zoisite (or ruby-zoisite) stones bezel set into a pierced and stamped sterling silver back plate. I do all the cuts and stamping (and related filing and sanding) by hand, so there’s a lot of work in this one. It came out great (in my opinion) and although it comes with a sterling silver chain (like most of my pendants), I plan on making a beaded necklace for it that combines ruby in zoisite, garnet, and sterling silver. Look for it soon.

Ribbon Variscite on sterling silver. Buy it online.

Next up is the first of two “ribbon” stones. The first is ribbon variscite, a relatively rare and costly stone that I picked up two years ago at the Tucson gem and mineral show. The variscite appears in a vein like a ribbon it its matrix. I did a simple back plate design for this one that has evenly spaced cuts around the bezel setting.

Bio Chrysoprase on sterling silver. Buy it online.

The other ribbon stone is bio chrysoprase, a rare form of quartz with a great green color in a line through the stone’s matrix. It’s an almond shaped stone and I used a design similar to one I’ve done before, framing the stone in a hand-textured sterling silver structure and setting it with prongs. This design is a lot of work — there are 10 individual solders! — but I think it’s so worth it.

Copper cross with Kingman turquoise cabochon. Buy it online.

And finally, something completely different for me — by request: a Christian cross. I’ve been thinking about how I wanted to make this piece and decided to try a prototype in copper before I dive into silver. The design requires thick sheet metal — 18 gauge — which, in silver, can be quite costly. So I experimented with copper to get the right shape, stamping design, and cabochon positioning. I think it came out nice and I will be making more of these in sterling silver over the weeks to come. Until then, if you like copper, you can get this one at a very reasonable price.

I’ll be at Leavenworth art in the park for two consecutive weekends starting on August 24, so if these pieces don’t sell from my online shop, you can find them there — along with any other new pieces I create over the next 10 days.

Segmented Ring Sterling Silver and Copper Pendants

Several riffs on the same basic pendant design.

Ring Onyx Pendant

Ring Turquoise Pendant

Ring Variscite Pendant

Three versions of the same basic design: Sterling Silver ring with Onyx stone, Copper ring with Kingman Turquoise Stones, and Copper ring with variscite stone.

Inspired by a photo in the now defunct Lapidary Journal magazine, I’ve completed three riffs (so far) on a design that combines silver, copper, and small gemstones.

I start by making and texturing a sterling silver or copper ring. Then I hand cut, texture, and solder on sterling silver and copper circle wedges or halves. I add bezel cups for various sizes of small gemstones such as turquoise or onyx, as well as a ring and hand-formed bail. After applying patina and polishing, I set the stones and the piece is done.

I like making these because they’re all subtly different and the combinations of shapes, textures, metals, and stones is limitless. They range in size from a diameter of 1.7 to 1.8 inches with another half inch at the top for the bail.

I’ll be making custom beaded necklaces for each pendant — provided I have the coordinating beads — that will be available separately. (You can see the one I made for the piece with the onyx stone in the first photo.) The pendants will come with an 18″ sterling silver chain if you prefer not to buy the beaded necklace.

What do you think? Care to sketch up a variation that you’d like to see and wear? I’d love to make your designs a reality and this is a great piece to make variations of.

New Fold-Over Pendants in Stock

Five new pendants added to inventory.

After last week’s visit to the shops in Winthrop and Twisp that sell my jewelry, I had to hustle to start building up stock. So I started with some items I already had partially made: my “fold-over” bail pendants.

Foldover Kingman T Bronze
Kingman Turquoise with bronze on sterling silver.

Foldover Kingman Turquoise and Spiny Oyster Shell with Bronze
Kingman Turquoise and Orange Spiny Oyster Shell with bronze on sterling silver.

Foldover Labradorite
Labradorite on sterling silver.

Foldover Lapis Lazuli
Lapis Lazuli on sterling silver.

Foldover Rose Quartz
Rose Quartz on sterling silver.

As I’ve mentioned elsewhere, I make these in batches, completing one step on all pieces before moving on to the next step. For those who are curious, the steps are as follows:

Cut sterling silver sheet in two different sizes of the same elongated teardrop shape. These are all hand cut. I’ll normally cut more than I need for the pendants I plan to make so I have some already done for next time I make them. That’s why the ones I made this weekend were already partially made.
Sand the edges of each cut piece to smooth them.
Choose the stones for each piece. I have a dwindling inventory of small gemstones that are perfectly sized for these. I try to pick a variety.
Make the bezels for each stone. None of these are “standard” sizes so I need to make a bezel from scratch for each one. I start with fine or sterling silver strip and then size, cut, solder, pickle, and shape it.
Solder the bezels onto the teardrop back plates for each pendant, then pickle, wash, and dry them.
Stamp the backplates with a variety of designs. I have no set design so these are all different every time I make them.
Apply a darkening agent to blacken the silver.
Use a variety of techniques to polish the pieces so the silver is bright while the cuts made by the stamps remain darker. This involves manually polishing and putting each piece through a series of tumbling processes that take four to six hours.
Wash and dry each piece.
Set the stones. I need to remember which stone goes into which piece since they’re not interchangeable!
Roll the bail around bail-making pliers to create the bail.

Because of the assembly line process I use to make these in batches, if I start early enough, I can usually make 4 to 8 of them in a day — that’s how I can keep them affordably priced. The trick is to get them into the tumblers at roughly the same time as early in the day as possible. While they’re tumbling, I can usually get started on a new piece that isn’t part of a batch.

All of my fold-over bail pendants are made of sterling silver (and stamped as such on back) or copper with good quality gemstone cabochons set in them. They come with an 18″ sterling silver chain. They retail for $69 and can be found in my online shop or at many of the shops and galleries where my work is sold.

What’s New: Week Ending February 26, 2022

Jewelry made during the week ending February 26, 2022.

Here’s some of the jewelry I made this week. See more photos and buy them in my online shop. As always, new items are available online at 20% (or more) off for a limited time between art shows.