Tag: orange spiny oyster

More New Pendants and Beaded Necklaces

I add a variety of new items to my online shop and in preparation for two back-to-back art shows in Leavenworth, WA.

I was busy in my shop for most of last week, continuing to make inventory for upcoming shows as summer winds to a close.

I started the week by making six beaded necklaces to match pendants I’d already made. You can find all of these in the Necklaces section of my online shop; I’ll be displaying them with the pendants I made them for at upcoming shows, even though they can be purchased separately.

Bumble Bee Jasper Necklace Howlite Necklace

Kingman Turquoise Necklace Onyx Necklace

Picture Jasper Necklace Ruby Zoisite Garnet Necklace
New necklaces in my shop. Left to right, top to bottom: Bumble Bee Jasper and sterling silver, Howlite and sterling silver, Kingman Turquoise with sterling silver and copper, black Onyx with sterling silver and copper, Picture Jasper with sterling silver, and Ruby in Zoisite and red Garnet with sterling silver.

Then I got down to it and made a few more pendants.

Kt Square w Cuts and Neck
Kingman Turquoise, orange spiny oyster shell, and bronze cabochon bezel set on sterling silver.

I had this nearly square Kingman Turquoise with Spiny Oyster Shell and bronze cabochon that was really calling out to me. I bezel-set it on a nearly square sterling silver backplate, which I accented with hand cut lines and stamped sterling silver balls. I used a tube bail; the photo here shows the pendant with the Kingman Turquoise beaded necklace shown above, which is sold separately.

Malachite Pendant
Malachite cabochon bezel set in sterling silver.

Because I was completely out of stock on pendants with another popular stone — malachite — I chose a small round cabochon and set that with a completely new style, using square wire wrapped around the bezel to form part of the bail. I’m not sure how much I like this design, but the stone is certainly pretty. I’ll be making a malachite necklace to go with this this weekend.

Silver Cross
Sterling silver cross with Kingman Turquoise accent stone.

And finally, since I was so happy with the way the prototype copper cross I made last week came out, I made one in silver using the same techniques but upgrading the bail. I really like the rough, handmade look of these pieces.

All of these pendants are available in the Pendants area of my online shop and will be at my upcoming shows — until sold.

Keep checking in for more items as I make them. I can’t update this site daily, but I hope to be able to keep doing it at least once a week as I add inventory, show dates, and classes.

New Fold-Over Pendants in Stock

Five new pendants added to inventory.

After last week’s visit to the shops in Winthrop and Twisp that sell my jewelry, I had to hustle to start building up stock. So I started with some items I already had partially made: my “fold-over” bail pendants.

Foldover Kingman T Bronze
Kingman Turquoise with bronze on sterling silver.

Foldover Kingman Turquoise and Spiny Oyster Shell with Bronze
Kingman Turquoise and Orange Spiny Oyster Shell with bronze on sterling silver.

Foldover Labradorite
Labradorite on sterling silver.

Foldover Lapis Lazuli
Lapis Lazuli on sterling silver.

Foldover Rose Quartz
Rose Quartz on sterling silver.

As I’ve mentioned elsewhere, I make these in batches, completing one step on all pieces before moving on to the next step. For those who are curious, the steps are as follows:

  1. Cut sterling silver sheet in two different sizes of the same elongated teardrop shape. These are all hand cut. I’ll normally cut more than I need for the pendants I plan to make so I have some already done for next time I make them. That’s why the ones I made this weekend were already partially made.
  2. Sand the edges of each cut piece to smooth them.
  3. Choose the stones for each piece. I have a dwindling inventory of small gemstones that are perfectly sized for these. I try to pick a variety.
  4. Make the bezels for each stone. None of these are “standard” sizes so I need to make a bezel from scratch for each one. I start with fine or sterling silver strip and then size, cut, solder, pickle, and shape it.
  5. Solder the bezels onto the teardrop back plates for each pendant, then pickle, wash, and dry them.
  6. Stamp the backplates with a variety of designs. I have no set design so these are all different every time I make them.
  7. Apply a darkening agent to blacken the silver.
  8. Use a variety of techniques to polish the pieces so the silver is bright while the cuts made by the stamps remain darker. This involves manually polishing and putting each piece through a series of tumbling processes that take four to six hours.
  9. Wash and dry each piece.
  10. Set the stones. I need to remember which stone goes into which piece since they’re not interchangeable!
  11. Roll the bail around bail-making pliers to create the bail.

Because of the assembly line process I use to make these in batches, if I start early enough, I can usually make 4 to 8 of them in a day — that’s how I can keep them affordably priced. The trick is to get them into the tumblers at roughly the same time as early in the day as possible. While they’re tumbling, I can usually get started on a new piece that isn’t part of a batch.

All of my fold-over bail pendants are made of sterling silver (and stamped as such on back) or copper with good quality gemstone cabochons set in them. They come with an 18″ sterling silver chain. They retail for $69 and can be found in my online shop or at many of the shops and galleries where my work is sold.